ENTERASYS A2H254-16 P0973BK设备提供以下类型的交换机端口连接

A2H124-16可堆叠设备提供以下类型的交换机端口连接：

•8个100BASE‐T 10/100 Mbps铜质RJ445端口（奇数1–15）。

•8个100BASE‐FX多模MT‐RJ端口（偶数编号2–16）。

•2个SFP插槽（标记为端口19和20），提供安装小型可插拔的选项

（SFP）适用于符合1000BASE‐T标准的铜质连接或1000BASE‐SX\LX光纤的Mini‐GBIC

光学连接。

•2个1000BASE‐T RJ45连接器（标记为端口17和18），可用于堆叠连接

当交换机在堆栈配置中操作时，或者当

开关作为一个独立的设备运行。

需要端口字符串参数的命令使用以下语法来指定端口类型、插槽

位置和端口号：

端口类型。单元号。端口号

其中端口类型可以是：

用于100Mbps以太网的fe

用于1Gbps以太网的ge

10 Gbps以太网的tg

主机端口的主机

用于vlan接口的vlan

IEEE802.3链路聚合端口的滞后

The A2H124‐16 stackable device provides the following types of switch port connections:

• 8 100BASE‐T 10/100 Mbps copper RJ445 ports (odd numbered 1 – 15).

• 8 100BASE‐FX multimode MT‐RJ ports (even numbered 2 – 16).

• 2 SFP slots (labeled port 19 and 20) that provide the option of installing Small Form Pluggable

(SFP) Mini‐GBICs for 1000BASE‐T compliant copper connections or 1000BASE‐SX\LX fiber‐

optic connections.

• 2 1000BASE‐T RJ45 connectors (labeled port 17 and 18) that can be used for stack connections

when the switch is operating in a stack configuration, or as standard switch ports when the

switch is operating as a stand alone device.

Commands requiring a port‐string parameter use the following syntax to designate port type, slot

location, and port number:

port type.unit number.port number

Where port type can be:

fe for 100‐Mbps Ethernet

ge for 1‐Gbps Ethernet

tg for 10‐Gbps Ethernet

host for the host port

vlan for vlan interfaces

lag for IEEE802.3 link aggregation ports

Unit number can be:

1 ‐ 8 for switch units in a SecureStack A2 stack

Port number can be:

1 – 52 for the A2H124‐48 and A2H124‐48P

1 – 28 for the A2H124‐24, A2H124‐24P, and A2H124‐24FX

1 – 20 for the A2H254‐16

The highest valid port number is dependent on the number of ports in the device and the port

type.

1 A2H124-24P 1 0xa08245 2 A2H124-24 1 0xa08245 3 A2H124-48 1 0xa08245 4 A2H124-48P 1 0xa08245 5 A2H124-24FX 1 0xa08245 6 A2H254-16 1 0xa08245