集散控制系统配件HIMA F2DO16 01 F2DO1601 安全相关控制器

                                                        产品详情资料：

计时器正在计数时写入新计数不会影响当前序列。新的计数将在当前序列结束时加载VMIVME-7740具有可选的板载闪存大容量存储系统，该系统允许主机发出命令，将块读或写到闪存阵列中的内存。此闪存在用户看来是一个智能ATA（IDE）磁盘驱动器，具有与“旋转介质”IDE硬盘驱动器相同的功能和功能。闪存位于VMIVME-7740上，作为辅助IDE总线主设备（辅助IDE母线从设备不可分配）。默认设置为AUTO。这可以在BIOS菜单中看到。从Main BIOS（主BIOS）菜单中选择Secondary Master（辅助主机），然后按Enter键。默认类型为AUTO。有关更多详细信息，请参阅附录C，Phoenix BIOS。

                                                             产品英文详情资料：

Writing a new count while the Timer is counting does not affect the current sequence. The new count will be loaded at the end of current sequenceThe VMIVME-7740 features an optional on-board Flash mass storage system that allows the host computer to issue commands to read or write blocks to memory in a Flash memory array. This Flash Disk appears to the user as an intelligent ATA (IDE) disk drive with the same functionality and capabilities as a “rotating media” IDE hard drive.The Flash Disk resides on the VMIVME-7740 as the secondary IDE bus master device (the secondary IDE bus slave device is not assignable). The default setting is AUTO. This can be seen in the BIOS menus. From the Main BIOS menu select Secondary Master and press the Enter key. The default type will be AUTO. Refer to Appendix C, Phoenix BIOS for additional details.