Noztek Pro  长丝挤出机打印 Noztek Pro Desktop Filament Extruder

The Noztek Pro Desktop Filament Extruder, based on the original design to solve the problem of expensive 3d printing filament. We wanted to give makers the opportunity and flexibility to create filament of their own spec. The current model has been constantly improved over the last 5 years, remaining a reputable classic today.

The Noztek Pro combines a high torque planetary motor and a bespoke engineered screw, offering fast extrusion of just about any polymer in pellet or powdered form. The Noztek Pro is a plug and play extruder, which means in just 15 minutes it can be unboxed and ready to use. Just plug in, turn on the heater and add the resin, then turn on the motor and you will be extruding straight away. With no kit to assemble, this extruder is extremely reliable simple and easy to use.

Use & Efficiency

The Noztek Pro will extrude at 2.5m per minute, depending on the type of material you are extruding. This will result in 1Kg of filament in around 2 hours.
We now provide a pre-heater band as standard which takes most of the strain off the motor; improving the extrusion rate and increasing longevity.

This advanced extruder has been tested using an extensive range of polymers including ABS, PLA , PET. PP, HDPE, PP and many more.  Powdered resins, composite combinations and recycled plastic powders can be extruded thanks to our bespoke in-house manufactured screw design.  In fact, it’s capable of extruding just about anything you throw at it. You can also mix and make your own coloured filament, using readily available masterbatch pellets. These are simply mixed in the hopper, which opens up a whole new range of colour options.

NEW

The Noztek Pro is now available with an upgraded Stainless Steel Barrel & Screw, specially designed for durability while extruding abrasive materials.

Upgrade and extend your Extruding system with our Resin & Spool Dehydrator, Winder and Tolerance Puller

Noztek  Pro Desktop Filament Extruder Specifications

• Extrudes at 1-300°C

• Bespoke screw design

• Swappable barrel

• *NEW* Stainless Steel Barrel & Screw option available

• Filament tolerances 1.75mm (+ .04/ – .04)

• 1.75 and 3mm dies are included, blanks are also available

• 45° bracket included

• Extrudes at up to 2.5m per minute

• Fully assembled and ready to make filament straight out of the box

• The diameter of the screw is 14mm width, with a 23° pitch, a 5mm depth and 5mm channel width and 26cm length.

All Noztek Extruders come with a full 1 year return to base Warranty

For UK customers we will ship a 220v unit. If you are ordering from overseas please let us know the voltage and frequency required, as we also keep 110v units in stock.

Noztek Pro Desktop Filament Extruder Kit Includes: 1 Fully assembled Filament Extruder, 0.5 kg ABS Pellets (MFI-22) (to get started right away), 2 dies (1.75mm and 3mm), 1 instruction manual.