ABB 3BHE024747R0101 参考数据集和辅助参考数据

基板具有锁定机构，该锁定机构将金属背板连接到

DIN导轨，提供有效的接地连接。

1.将锁定装置旋转到打开位置。钩住后部的上唇

在DIN导轨的上边缘上方固定基板，然后卡扣基板

完全进入安装位置。

2.将锁定装置旋转到滑动位置。沿着DIN滑动装置

导轨到所需的安装位置，并将其连接到相邻的单元底板

带有连接器插头和插座。

3.将锁定装置顺时针旋转至锁定位置。

ACS800标准应用程序7.x支持使用四个数据集，

每个方向两个。

用于控制驱动器的两个数据集被称为主参考

数据集和辅助参考数据集。驱动器读取的源

主参考数据集和辅助参考数据集由参数90.04和

分别为90.05。主参考数据集的内容是固定的。这个

可以使用参数90.01来选择辅助参考数据集的内容，

90.02和90.03。

包含驱动器实际信息的两个数据集称为

主实际信号数据集和辅助实际信号数据集中。的内容

两个数据集都是部分可选择的，并且具有组92处的参数。

通过设置参数98.02 COMM.MODULE LINK（通信模块链接）激活外部控制

给ADVANT。

The base plate has a locking mechanism that connects the metallic back plate to the

DIN rail, providing an effective ground connection.

1. Rotate the locking device to the OPEN position. Hook the upper lip at the rear

of the base plate over the upper edge of the DIN rail and snap the base plate

fully into the mounting position.

2. Rotate the locking device to the SLIDE position. Slide the unit along the DIN

rail to the desired mounting position and attach it to the adjacent unit base plate

with the connector plugs and sockets.

3. Rotate the locking device clockwise to the LOCKED position.

The ACS800 Standard Application Program 7.x supports the use of four datasets,

two in each direction.

The two datasets for controlling the drive are referred to as the Main Reference

dataset and the Auxiliary Reference dataset. The sources from which the drive reads

the Main and Auxiliary Reference datasets are defined by parameters 90.04 and

90.05 respectively. The contents of the Main Reference dataset are fixed. The

contents of the Auxiliary Reference dataset can be selected using parameters 90.01,

90.02 and 90.03.

The two datasets containing actual information on the drive are referred to as the

Main Actual Signal dataset and the Auxiliary Actual Signal dataset. The contents of

both datasets are partly selectable with the parameters at group 92.

External control is activated by setting parameter 98.02 COMM. MODULE LINK

to ADVANT.