H3C核心交换机COM口连远程交换机配置范例

准备好COM线

连电脑后，查看是几号COM口

接入H3C S5500V2核心交换机的CONSOLE口

通过SecureCRT软件接入核心交换机，输入管理员用户名和密码

可以先ping一下

看交换机配置，telnet、ssh、ssh2都有可能。这边用的是ssh2

ssh2接入成功后，输入管理员用户名和密码

接入后

[SW-SHGXX-12F-15]interface GigabitEthernet1/0/22

[SW-SHGXX-12F-15-GigabitEthernet1/0/22]port access vlan 102

[SW-SHGXX-12F-15-GigabitEthernet1/0/22]quit

[SW-SHGXX-12F-15]write

The current configuration will be written to the device. Are you sure? [Y/N]:y

Please input the file name(*.cfg)[flash:/startup.cfg]

(To leave the existing filename unchanged, press the enter key):

flash:/startup.cfg exists, overwrite? [Y/N]:y

Validating file. Please wait...

Saved the current configuration to mainboard device successfully.

[SW-SHGXX-12F-15]quit

保存好log记录，配置完成。