2023年传感器MT1241-30Kg（托利多）资料

【广州洋奕电子】2023年，提供MT1241-30Kg（托利多）产品资料 。角差容易调整：一个模拟传感器组成的秤体，由于信号的不可辨别，校准时需在每个传感器上加砝码并利用接线盒中的电位器进行角差调整，由于各个传感器间存在着相互作用，因而需反复多次调整，耗时费力。由数字传感器组成的秤体，其角差的调整容易得多。由于仪表可以读取到四角每个传感器的受力情况，因此只要在各角加一遍载荷，仪表即可计算出各点的角差系数，可自动进行秤的角差调整，免去了反复加载砝码的麻烦，提高了效率。一遍加载即可完成角差调整，非常简便快捷。

Off-Center compensation One load cell can be used to support a  weighing platform and, due to the offcenter load compensation, the MT1241  will weigh within tolerance regardless of  load application point.  Bench and Floor Scales MT1241 provides the best weighing  performance for bench scales and  smaller floor scales in its capacity  range. With a low profile design, cost  optimization and an attractive product  appearance can be achieved. Robustness MT1241 allows 50% static overload  without compromising the weighing  performance. The passivated aluminium  provides good corrosion resistance suitable for many industrial applications. 

MT1241 Single Point Load Cell The MT1241 load cell features:  • OIML R60 C3 approval • NTEP 5000 III S/M approval • ATEX Zone 1/2 and 21/22 approvals • Off-center load compensation (R76) • 400x400 mm platform size • IP67 protection class • Passivated aluminum • 30-250kg capacity range The MT1241 is the ideal solution for small floor scales  and hoppers. Due to the low profile the integration into  any system is easy. The broad capacity range allows  wide application in industrial weighing applications.

1241系列型号：

MT1241-30Kg

MT1241-50Kg

MT1241-100Kg

MT1241-150Kg

MT1241-200Kg

MT1241-250Kg