Ubuntu环境下，使用开发STM32

Building STM32 development environment in Linux system

(Using Ubuntu 18.04 + Arm GNU Toolchain 12 + VS Code)

1.     Add normal user to root:

(1)   $ sudo vim /etc/sudoers

(2)   Insert the command:

2.     Install Java

(1)   Installation command:

$ sudo apt install openjdk-11-jdk

or $ sudo apt install openjdk-8-jdk (for other versions)

(2)   verify installation:

$ java --version

(3)   Add it to environment variable (optional):

$ sudo vim /etc/environment

add the java installation path: /usr/lib/jvm/java-11-openjdk-amd64

(4)   Enable the change:

$ source /etc/environment

(5)   Verify the change:

$ echo $JAVA_HOME

3.     Install the GCC-Arm:

(1)   Download the gcc-arm toolchain:

(2)   Copy the package to /usr/local/arm:

$ sudo cp arm-gnu-toolchain-12.3.rel1-x86_64-arm-none-eabi.tar.xz /usr/local/arm/

(3)   Extract the package:

$ sudo tar -xvf arm-gnu-toolchain-12.3.rel1-x86_64-arm-none-eabi.tar.xz

(4)   Add path to the environment:

$sudo vim /etc/profile

(5)   After restart, verify the change:

(6)   Set VSCode:

Find GCC installation path:

4.     Install the OpenOCD:

(1)   Use git to download the openocd:

$ git clone https://github.com/openocd-org/openocd.git

(2)   Download the essential library:

$sudo apt install build-essential pkg-config autoconf automake libtool libusb-dev libusb-1.0-0-dev libhidapi-dev libtool libsysfs-dev

(3)   Open the OpenOCD directory and enter $ sudo ./bootstrap

(4)   Enter the $ sudo ./configure

(5)   Enter $ sudo make and then enter $ sudo make install to finish the installation.

(6)   Verify the installation:

5. Install STM32CubeMX

(1)   After unzipping the package, set the installation file as an executable file:

$ chmod 777 SetupSTM32CubeMX-6.9.1

(2)   Run the installation application:

$./SetupSTM32CubeMX-6.9.1

(3)   After finishing the installation, add STM32CubeMX path to environment variable:

$ sudo vim ~/.bashrc

And then adding this command to the end of file:

Save and quit Vim. Next enable the change:

$source ~/.bashrc

(4) Verify the Change:

6. Add STM32CubeProgrammer to the environment path:

$ sudo vim ~/.bashrc and then $ source ~/.bashrc

7. Install the STM32CubeCLT:

8. VSCode and Makefile setting:

(1)   VScode

get Defines from Makefiles:

(2)   Add make flash command to Makefile file:

9.     Set full screen display in Virtualbox: