BASLER A404K 请勿在强电磁场附近操作相机

A400k系列区域扫描相机有不同的版本；版本取决于

最大帧速率和Camera Link接口。相机有单色可选

版本（A402k、A403k、A404k、A406k）和彩色版本（A402 kc、A403 kc、A4 04kc、A 406kc）。

在整个手册中，该相机将被称为A400k。仅对

将如此指示具体版本。

在整个手册中，与单色版本相关的说明也适用于

彩色版本。只有在必要时才会特别提及颜色版本。

请勿移除相机的序列号标签

如果标签被移除，并且无法从相机的寄存器中读取序列号

保修无效。

阅读手册

在使用相机之前，请仔细阅读手册。

将异物放在摄像机之外

请勿打开摄像头外壳。接触内部部件可能会损坏它们。

注意不要让液体、灰尘、沙子、易燃物或金属材料进入相机

住房如果在内部有异物的情况下操作，摄像头可能会出现故障或引发火灾。

电磁场

请勿在强电磁场附近操作相机。避免静电

充电。

运输

只能运输原装相机。请勿丢弃包装。

打扫

尽可能避免清洁CMOS传感器的表面。如果必须清洁，请使用柔软、无绒布

用少量异丙基（=纯酒精）浸湿的布。不要使用甲基化酒精。

由于静电放电会损坏CMOS传感器，因此必须使用不会损坏CMOS传感器的布

清洁过程中产生静电（棉花是一个不错的选择）。

要清洁相机外壳的表面，请使用柔软干燥的布。要去除严重污渍，请使用

用软布蘸少量中性洗涤剂，然后擦干。

不要使用挥发性溶剂，如汽油和稀释剂；它们会损坏表面光洁度。

A400k series area scan cameras are available in different versions; the version depends on the

maximum frame rate and the Camera Link interface. The cameras are available in monochrome

versions (A402k, A403k, A404k, A406k) and in color versions (A402kc,A403kc, A404kc, A406kc).

Throughout the manual, the camera will be called the A400k. Passages that are only valid for a

specific version will be so indicated.

Throughout the manual, the statements relating to the monochrome versions also apply to the

color versions. The color versions will specifically be referred to only when necessary.

Do not remove the camera’s serial number label

If the label is removed and the serial number can’t be read from the camera’s registers, the

warranty is void.

Read the manual

Read the manual carefully before using the camera.

Keep foreign matter outside of the camera

Do not open the camera housing. Touching internal components may damage them.

Be careful not to allow liquids, dust, sand, flammable, or metallic material inside the camera

housing. If operated with any foreign matter inside, the camera may fail or cause a fire.

Electromagnetic fields

Do not operate the camera in the vicinity of strong electromagnetic fields. Avoid electrostatic

charging.

Transporting

Only transport the camera in its original packaging. Do not discard the packaging.

Cleaning

Avoid cleaning the surface of the CMOS sensor if possible. If you must clean it, use a soft, lint free

cloth dampened with a small quantity of isopropyl (= pure alcohol). Do not use methylated alcohol.

Because electrostatic discharge can damage the CMOS sensor, you must use a cloth that will not

generate static during cleaning (cotton is a good choice).

To clean the surface of the camera housing, use a soft, dry cloth. To remove severe stains, use a

soft cloth dampened with a small quantity of neutral detergent, then wipe dry.

Do not use volatile solvents such as benzine and thinners; they can damage the surface finish.