事实上我也查阅了微星、EVGA等品牌主板的BIOS POST Codes文档，和这一份基本没有区别，结合我自己的影驰Z690主板的debug Led的相关代码，可以做到通用，故分享在这里，对于较新的，带有debug诊断代码灯且使用AMI AptioV Uefi固件（BIOS）的桌面平台，均可以参考这份文档中所列出的各种代码释义，来寻找平台自检失败的原因。

截图：

AMI AptioV Status Codes 

————————————————————————

Checkpoint Ranges（检查点区间）

Status Code Range             Description 

0x01 – 0x0B                       SEC execution 

0x0C – 0x0F                       SEC errors 

0x10 – 0x2F                       PEI execution up to and including memory detection 

0x30 – 0x4F                       PEI execution after memory detection 

0x50 – 0x5F                       PEI errors 

0x60 – 0x8F                       DXE execution up to BDS 

0x90 – 0xCF                       BDS execution 

0xD0 – 0xDF                      DXE errors 

0xE0 – 0xE8                      S3 Resume (PEI) 

0xE9 – 0xEF                      S3 Resume errors (PEI) 

0xF0 – 0xF8                       Recovery (PEI) 

0xF9 – 0xFF                       Recovery errors (PEI)

Standard Checkpoints（标准检查点）

SEC Phase（SEC阶段，整个Uefi boot的第一阶段，这一阶段过不去，大概率是CPU或主板硬件问题）

Status Code                      Description

0x00                                    Not used

Progress Codes 

0x01              Power on. Reset type detection (soft/hard). 

0x02              AP initialization before microcode loading 

0x03             North Bridge initialization before microcode loading 

0x04             South Bridge initialization before microcode loading 

0x05             OEM initialization before microcode loading 

0x06             Microcode loading 

0x07            AP initialization after microcode loading 

0x08            North Bridge initialization after microcode loading 

0x09            South Bridge initialization after microcode loading 

0x0A            OEM initialization after microcode loading 0x0B Cache initialization

SEC Error Codes

0x0C-0x0D         Reserved for future AMI SEC error codes

0x0E                  Microcode not found 

0x0F                  Microcode not loade

SEC Beep Codes（SEC阶段的蜂鸣提示）           None

PEI Phase（PEI预初始化阶段，本阶段在BIOS内置DXE加载之前）

Status Code                        Description

Progress Code

0x10 PEI Core is started 

0x11 Pre-memory CPU initialization is started 

0x12 Pre-memory CPU initialization (CPU module specifi c) 

0x13 Pre-memory CPU initialization (CPU module specifi c) 

0x14 Pre-memory CPU initialization (CPU module specifi c) 

0x15 Pre-memory North Bridge initialization is started 

0x16 Pre-Memory North Bridge initialization (North Bridge module specifi c) 

0x17 Pre-Memory North Bridge initialization (North Bridge module specifi c) 

0x18 Pre-Memory North Bridge initialization (North Bridge module specifi c) 

0x19 Pre-memory South Bridge initialization is started 

0x1A Pre-memory South Bridge initialization (South Bridge module specifi c) 

0x1B Pre-memory South Bridge initialization (South Bridge module specifi c) 

0x1C Pre-memory South Bridge initialization (South Bridge module specifi c) 

0x1D – 0x2A OEM pre-memory initialization codes 

0x2B Memory initialization. Serial Presence Detect (SPD) data reading 

0x2C Memory initialization. Memory presence detection 

0x2D Memory initialization. Programming memory timing information 

0x2E Memory initialization. Confi guring memory 

0x2F Memory initialization (other). 

0x30 Reserved for ASL (see ASL Status Codes section below) 

0x31 Memory Installed 

0x32 CPU post-memory initialization is started 

0x33 CPU post-memory initialization. Cache initialization 

0x34 CPU post-memory initialization. Application Processor(s) (AP) initialization 

0x35 CPU post-memory initialization. Boot Strap Processor (BSP) selection 

0x36 CPU post-memory initialization. System Management Mode (SMM) initialization 

0x37 Post-Memory North Bridge initialization is started 9 AMI AptioV Status Codes 

0x38 Post-Memory North Bridge initialization (North Bridge module specific) 

0x39 Post-Memory North Bridge initialization (North Bridge module specific) 

0x3A Post-Memory North Bridge initialization (North Bridge module specific) 

0x3B Post-Memory South Bridge initialization is started 

0x3C Post-Memory South Bridge initialization (South Bridge module specific) 

0x3D Post-Memory South Bridge initialization (South Bridge module specific) 

0x3E Post-Memory South Bridge initialization (South Bridge module specific) 

0x3F-0x4E OEM post memory initialization codes 

0x4F DXE IPL is started PEI Error Codes 

0x50 Memory initialization error. Invalid memory type or incompatible memory speed 

0x51 Memory initialization error. SPD reading has failed 

0x52 Memory initialization error. Invalid memory size or memory modules do not match. 

0x53 Memory initialization error. No usable memory detected 

0x54 Unspecifi ed memory initialization error. 

0x55 Memory not installed 0x56 Invalid CPU type or Speed 

0x57 CPU mismatch 

0x58 CPU self test failed or possible CPU cache error 

0x59 CPU micro-code is not found or micro-code update is failed 

0x5A Internal CPU error 

0x5B Reset PPI is not available 

0x5C PEI phase BMC self-test failure 

0x5C-0x5F Reserved for future AMI error codes S3 Resume Progress Codes 

0xE0 S3 Resume is stared (S3 Resume PPI is called by the DXE IPL) 

0xE1 S3 Boot Script execution 

0xE2 Video repost 

0xE3 OS S3 wake vector call 

0xE4-0xE7 Reserved for future AMI progress codes S3 Resume Error Codes 

0xE8 S3 Resume Failed 

0xE9 S3 Resume PPI not Found 0xEA S3 Resume Boot Script Error 

0xEB S3 OS Wake Error 

0xEC-0xEF Reserved for future AMI error codes 

0xF0 Recovery condition triggered by fi rmware (Auto recovery) 

0xF1 Recovery condition triggered by user (Forced recovery) 

0xF2 Recovery process started 

0xF3 Recovery fi rmware image is found 

0xF4 Recovery fi rmware image is loaded 

0xF5-0xF7 Reserved for future AMI progress codes 

Recovery Error Codes 

0xF8 Recovery PPI is not available 

0xF9 Recovery capsule is not found 

0xFA Invalid recovery capsule 

0xFB – 0xFF Reserved for future AMI error codes 

PEI Beep Codes （PEI锋鸣代码）

# of Beeps                 Description 

1声（下同）         Memory not installed 

2                             Recovery started 

3                             Typically for development use. The beep code is generated when DXEIPL PPI or DXE Core is not found.

4                            Recovery failed 

4                            S3 Resume failed 

7                              Typically for development use. The beep code is generated when platform cannot be reset because reset PPI is not available

DXE Phase(DXE驱动加载阶段，日常多数开机故障代码可从中寻找) 

Status Code                  Description 

0x60 DXE Core is started 

0x61 NVRAM initialization 

0x62 Installation of the South Bridge Runtime Services 

0x63 CPU DXE initialization is started 

0x64 CPU DXE initialization (CPU module specifi c) 

0x65 CPU DXE initialization (CPU module specifi c) 

0x66 CPU DXE initialization (CPU module specifi c) 

0x67 CPU DXE initialization (CPU module specifi c) 

0x68 PCI host bridge initialization 

0x69 North Bridge DXE initialization is started 

0x6A North Bridge DXE SMM initialization is started 

0x6B North Bridge DXE initialization (North Bridge module specific)

0x6C North Bridge DXE initialization (North Bridge module specifi c) 

0x6D North Bridge DXE initialization (North Bridge module specifi c) 

0x6E North Bridge DXE initialization (North Bridge module specifi c) 

0x6F North Bridge DXE initialization (North Bridge module specifi c) 

0x70 South Bridge DXE initialization is started 

0x71 South Bridge DXE SMM initialization is started 

0x72 South Bridge devices initialization 

0x73 South Bridge DXE Initialization (South Bridge module specific) 

0x74 South Bridge DXE Initialization (South Bridge module specific) 

0x75 South Bridge DXE Initialization (South Bridge module specific) 

0x76 South Bridge DXE Initialization (South Bridge module specific) 

0x77 South Bridge DXE Initialization (South Bridge module specifi c) 

0x78 ACPI module initialization 

0x79 CSM initialization 

0x7A – 0x7F Reserved for future AMI DXE codes 

0x80 – 0x8F OEM DXE initialization codes 

0x90 Boot Device Selection (BDS) phase is started 

0x91 Driver connecting is started 

0x92 PCI Bus initialization is started 

0x93 PCI Bus Hot Plug Controller Initialization 

0x94 PCI Bus Enumeration 

0x95 PCI Bus Request Resources 

0x96 PCI Bus Assign Resources 

0x97 Console Output devices connect 

0x98 Console input devices connect 

0x99 Super IO Initialization 

0x9A USB initialization is started 

0x9B USB Reset 

0x9C USB Detect 

0x9D USB Enable 

0x9E – 0x9F Reserved for future AMI codes 

0xA0 IDE initialization is started 

0xA1 IDE Reset 

0xA2 IDE Detect 

0xA3 IDE Enable 

0xA4 SCSI initialization is started 

0xA5 SCSI Reset 

0xA6 SCSI Detect

0xA7 SCSI Enable 

0xA8 Setup Verifying Password 

0xA9 Start of Setup 

0xAA Reserved for ASL (see ASL Status Codes section below) 

0xAB Setup Input Wait 

0xAC Reserved for ASL (see ASL Status Codes section below) 

0xAD Ready To Boot event 

0xAE Legacy Boot event 

0xAF Exit Boot Services event 

0xB0 Runtime Set Virtual Address MAP Begin 

0xB1 Runtime Set Virtual Address MAP End 

0xB2 Legacy Option ROM Initialization 

0xB3 System Reset 

0xB4 USB hot plug 

0xB5 PCI bus hot plug 

0xB6 Clean-up of NVRAM 

0xB7 Confi guration Reset (reset of NVRAM settings) 

0xB8 – 0xBF Reserved for future AMI codes 

0xC0 – 0xCF OEM BDS initialization code

DXE Error Codes

0xD0 CPU initialization error 

0xD1 North Bridge initialization error 

0xD2 South Bridge initialization error 

0xD3 Some of the Architectural Protocols are not available 

0xD4 PCI resource allocation error. Out of Resources 

0xD5 No Space for Legacy Option ROM 

0xD6 No Console Output Devices are found 

0xD7 No Console Input Devices are found 

0xD8 Invalid password 

0xD9 Error loading Boot Option (LoadImage returned error) 

0xDA Boot Option is failed (StartImage returned error) 

0xDB Flash update is failed 

0xDC Reset protocol is not available 

0xDD DXE phase BMC self-test failure

DXE Beep Codes（DXE阶段蜂鸣器代码）

# of Beeps       Description 

1声（下同）    Invalid password 

4                    Typically for development use. The beep code is generated when some of the Architectural Protocols are not available. 

5                    No Console Input or Output Devices are found

6                    Flash update is failed 

7                    Typically for development use. The beep code is generated when platform cannot be reset because reset protocol is not available. 

8                   Platform PCI resource requirements cannot be met

ACPI/ASL Checkpoints

Status Code             Description

0x01 System is entering S1 sleep state 

0x02 System is entering S2 sleep state 

0x03 System is entering S3 sleep state 

0x04 System is entering S4 sleep state 

0x05 System is entering S5 sleep state 

0x10 System is waking up from the S1 sleep state 

0x20 System is waking up from the S2 sleep state 

0x30 System is waking up from the S3 sleep state 

0x40 System is waking up from the S4 sleep state 

0xAC System has transitioned into ACPI mode. Interrupt controller is in PIC mode. 

0xAA System has transitioned into ACPI mode. Interrupt controller is in APIC mode

PDF文档下载：

https://www.123pan.com/s/L3y0Vv-KKM3A.html提取码:As9P