Bently 133396-01振动监测系统
振动传感器：安装在设备上，用于感知振动信号并将其转换成电信号。
监测单元：收集并处理振动传感器产生的电信号，然后将数据传送给控制系统进行分析和显示。
控制系统：负责处理传感器数据，进行分析和计算，然后通过报警或显示系统向操作人员提供关键信息。
报警系统：根据设定的振动阈值，当机械设备的振动超过预定范围时，触发警报以通知操作人员及时采取措施。
数据存储和记录：将振动数据存储，以便后续分析和故障诊断。
Vibration sensor: installed on the device, used to sense vibration signals and convert them into electrical signals.
Monitoring unit: Collect and process electrical signals generated by vibration sensors, and then transmit the data to the control system for analysis and display.
Control system: responsible for processing sensor data, analyzing and calculating, and then providing key information to operators through alarm or display systems.
Alarm system: According to the set vibration threshold, when the vibration of mechanical equipment exceeds the predetermined range, an alarm is triggered to notify the operator to take timely measures.
Data storage and recording: Store vibration data for subsequent analysis and fault diagnosis.
