Isolated copper: Split Plane (GND) on GND02 Copper island connec
Un-Routed Net Constraint ( (All) )
Isolated copper: Split Plane (GND) on GND02. Copper island connected to pads/vias detected. Copper area is : 151.758 sq. mils
Isolated copper: Split Plane (GND) on GND02. Copper island connected to pads/vias detected. Copper area is : 151.758 sq. mils
Isolated copper: Split Plane (GND) on GND02. Copper island connected to pads/vias detected. Copper area is : 151.758 sq. mils
Isolated copper: Split Plane (GND) on GND02. Copper island connected to pads/vias detected. Copper area is : 151.758 sq. mils
Isolated copper: Split Plane (GND) on GND02. Copper island connected to pads/vias detected. Copper area is : 151.758 sq. mils
Isolated copper: Split Plane (GND) on GND02. Copper island connected to pads/vias detected. Copper area is : 151.758 sq. mils
Isolated copper: Split Plane (GND) on GND02. Copper island connected to pads/vias detected. Copper area is : 203.776 sq. mils
Isolated copper: Split Plane (GND) on GND02. Copper island connected to pads/vias detected. Copper area is : 203.776 sq. mils
Isolated copper: Split Plane (GND) on GND02. Copper island connected to pads/vias detected. Copper area is : 203.776 sq. mils
Isolated copper: Split Plane (GND) on GND02. Copper island connected to pads/vias detected. Copper area is : 203.776 sq. mils
...
上面的还有很多条...
...
Power Plane Connect Rule(Relief Connect )(Expansion=20mil) (Conductor Width=10mil) (Air Gap=10mil) (Entries=4) (All)
Starved Thermal on GND02: Pad H1-11(3740.157mil,196.85mil) on Multi-Layer. Blocked 2 out of 4 entries.
Starved Thermal on GND02: Pad H2-11(3740.157mil,2362.192mil) on Multi-Layer. Blocked 2 out of 4 entries.
Starved Thermal on GND02: Pad H3-11(196.85mil,2362.205mil) on Multi-Layer. Blocked 2 out of 4 entries.
DRC检查时，上面的错误都在这三个固定孔（铜柱孔）这里，又是一顿搜索，无果。
选中铜柱孔
右键--》冲突
点击上面的蓝色 plane Connect（是个连接），自动跳转到规则设置
修改如下：
成功解决了上面的错误
总结就是规则那疏忽了，同样的错误，可能造成的原因不一样，如果当你遇到这个错误时，希望能帮到你....
注：AD是2022版
感觉还不错，同样的电脑，比之前的版本更流畅了，风扇声音也小了，本本的键盘也没之前那么热了
