A高分子量耐磨抗老化聚乙烯板抗紫外线聚乙烯板

  高分子聚乙烯板的使用年限：高分子聚乙烯板的使用年限一般在8到10年之间它的耐磨系数极高，应用能力强是钢铁的10倍，高分子量等级具有极好的抗冲击性，在常温甚至在-40F低温度下均如此。各种等级HDPE的独有特性是四种基本变量的适当结合：密度、分子量分子量分布和添加剂。不同的催化剂被用于生产定制特殊性能聚合物。这些变量相结合生产出不同用途的HDPE品级：在性能上达到最佳的平衡。具有良好的化学稳定性，可以抵抗大部份酸、碱、有机溶液，电气绝缘性好。

  UHMW-PE板用于发生滑动磨损或金属部件接触，导致摩擦或磨损的地方。它非常适用于斜槽和料斗衬里、输送机或部件、耐磨垫、机器导轨、冲击表面和导轨。

高耐磨性和抗冲击性
抗紫外线

易于加工以供工程使用

几乎完全不会受到化学侵蚀

低摩擦系数

不结块和粘附

良好的电气性能

在低温应用中表现出色 最高温度:180华氏度 吸水率< 0.01%

  Service life of high molecular weight polyethylene sheet: The service life of high molecular weight polyethylene sheet is generally between 8 and 10 years. Its wear resistance coefficient is extremely high, and its application capacity is 10 times stronger than that of steel. The high molecular weight grade has excellent impact resistance, even at room temperature and low temperature of - 40F. The unique characteristics of various grades of HDPE are the proper combination of four basic variables: density, molecular weight and molecular weight distribution, and additives. Different catalysts are used to produce customized polymers with special properties. These variables are combined to produce HDPE grades for different purposes: to achieve the best balance in performance. It has good chemical stability, can resist most acids, alkalis and organic solutions, and has good electrical insulation.

UHMW-PE plate is used in places where sliding wear or contact of metal parts causes friction or wear. It is very suitable for chute and hopper linings, conveyors or components, wear pads, machine guides, impact surfaces and guides.
High wear resistance and impact resistance
UV resistance
Easy to process for engineering use
Almost completely free from chemical attack
Low friction coefficient
No caking and adhesion
Good electrical performance
Excellent performance in low temperature applications Maximum temperature: 180 ° F water absorption<0.01%