《命令与征服3：泰伯利亚战争》情报数据库GDI武器，战术和系统—GDI工程师(3/20)

GDI combat engineers are able to capture enemy buildings and repair structures (including bridges and base buildings). Deploy an engineer into an enemy base structure in order to capture it - or send an engineer into a damaged building to fix it back up again. Damaged bridges can be repaired by deploying an engineer into the bridge auto-repair gatehouses.

 Engineer Combat Primer Excerpt

As a combat engineer a few cardinal rules should be kept in mind at all times:

1.  Never act alone in hostile territory. Your standard issue body armor is ineffective against most modern weapons.

2.  You are equipped with a standard GD45 sidearm. Only use it as a last resort as it will not penetrate most modern body armor.

3.  Once you gain access to an enemy structure be sure to disable the central computer terminal immediately and install your override program to connect the structure to the nearest command post.

4.  When entering a damaged structure be sure to initiate damage control programs for immediate results. Once the automation has kicked in you will be clear to commence more extensive repairs.

5.  Keep your hard-hat on at all times.

GDI - Units and Weapons

GDI战地工程师具有占领敌方建筑物和维修建筑（包括桥梁和基地建筑）的能力。部署一名工程师到敌方建筑中占领它——或者送一名工程师到受损的建筑物中将其再次修复。受损的桥梁可以通过部署一名工程师到桥梁自动维修小屋（the bridge auto-repair gatehouses，gatehouse是门房，警卫室的意思，这里译者直接按照隔壁红警2来了，虽然红警2里是hut）中修复。

节选自工程师战地入门

作为一名战地工程师，必须时刻牢记这些基本原则。

1.  永远不要在敌对领土上单独行动。你的标准防弹衣对大多数现代武器无效。

2.  你装备了一把标准GD45配枪。除非万不得已时不要使用，因为它打不穿大多数现代防弹衣。

3.  一旦你可以进入敌方建筑，确保立即关闭中央电脑终端，并安装你的覆写程序，将建筑与最近的指挥所相连。

4.  当进入一座受损的建筑物，确保立即开启受损控制程序以便获得成果。当自动维修开始生效你就可以开始更大范围的维修。

5.  时刻戴着安全帽。

GDI——单位和武器