Kayak How To : Boofing Waves and Hol...

Keeping the bad drive or lifting your boat over features many times is the difference between being in control or being at the mercy of the current therefore bouffe in your boat over waves and holes as a necessary technique to keep the water underneath the boat.

And not on the deck.

To achieve the booth where skip over the whole, we must first have angle relative to the feature and the current this angle will allow you to present more Paul or underside of the boat to the feature by holding edge away from the feature.

Well time stroke brings it all together by sweeping the bow up and over the feature.

The boat's angle relative to the current and future won't defer greatly, just enough to present more hall to the wave or the whole your stroke will have to provide enough spin and force at the right time to strengthen the boat out and overcome the deflection from the feature.

Another consideration to make is where to aim your kayak as your approaching waves or holes.

Instead of going right through the centre, aiming for the sides or shoulders is more ideal as more of this water flows downstream, whereas the foam pile in the center is more likely to go over the top of the boat and into your body.

So lets see this in practice with the rapid set dealing with waves holes and diagonal waves notice the powder is staying in line with the shoulders to make it a dryer line.

As he approaches the first diagonal, our paddlers has his angle and edge set, then takes a well timed stroke to counter the deflection of the diagonal wave, the backrest over the wave and the water stays on the hall.

Now let's see how it looks when the powder aims for the center of the waves and keeps the boat flat.

Notice the boat tends to be at the mercy of the current more by punching through or under features.

Though neither technique is right or wrong, each has their own applications and push your current and will have different effects on your boat was take a look side by side and see how they compare.

It becomes obvious quickly how each technique treats the boat differently in the current and how it affects the boats angle and momentum relative to the current.

Every river running technique has its own merits Trudeau control is your understanding of these techniques translated a proper execution, proper being your desired result.

So it's important to play with this technique and others to see how it will fit into your style and quiver of skills.

保持糟糕的驾驶或将你的船抬过许多特征是控制或受水流摆布的区别，因此在你的船上翻过海浪和水洞是保持船下面的水的必要技巧。

而不是在甲板上。

要实现跳过整体的展台，我们必须首先有相对于功能的角度，当前这个角度将允许你通过保持远离功能的边缘来呈现更多的大厅或船的底部。

通过将弓向上扫过功能，将所有这些整合在一起。

船相对于当前和未来的角度不会有太大的延迟，只是足以让波浪有更多的停顿，否则你的整个划水过程必须在适当的时候提供足够的旋转力，将它喷到船上，并克服从特征上的偏转。

另一个需要考虑的问题是，当你接近海浪或洞时，你的皮划艇应该瞄准哪里。

而不是直接穿过中心，瞄准两侧或肩部更理想，因为更多的水流流向下游，而中心的泡沫堆更有可能越过船顶进入你的身体。

因此，让我们在处理波浪孔和对角线波浪的快速布景中看到这一点，注意粉末与肩部保持在一条线上，使其成为干燥线。

当他接近第一条对角线时，我们的桨手设定好他的角度和边缘，然后适时划水，以抵消对角线波浪的偏转，靠背越过波浪，水留在大厅上。

现在让我们看看当粉末瞄准波浪中心并使船保持平坦时，它是什么样子。

请注意，船更倾向于通过撞击或撞击特征来受水流的摆布。

虽然这两种方法都没有对错之分，但每一种方法都有自己的应用，推动你的水流，对你的船产生不同的影响。

每一种技术在水流中对船的处理方式不同，以及它如何影响船相对于水流的角度和动量，很快就会显现出来。

每一种河流奔流技术都有其优点，特鲁多控制的是你对这些技术的理解转化为正确的执行，正确的是你想要的结果。

因此，运用这个技巧和其他技巧，看看它如何适应你的风格和技能是很重要的。